Guangzhou HongCe Equipment Co., Ltd.
We provide you with industry leading test equipment, advanced online system and solutions–anywhere in the world.
Add to Cart
IEC 60335-1 Home Appliances Testing Equipment Test Probe B of IEC 61032
Standard of Electrical Appliance Testing Equipment:
IEC 60335-1: 2020 Household and similar electrical appliances – Safety – Part 1: General requirements clause 8.1.1, 8.2, 22.1, 29.1, 29.2 and ect.;
IEC 61032 Protection of persons and equipment by enclosures –Probes for verification
Application of Test Probe B of IEC 61032:
Appliances shall be constructed and enclosed so that there is adequate protection against accidental contact with live parts.
Test probe B of IEC 61032 are applied with a force not exceeding 1 N, the appliance being in every possible position, except that appliances normally used on the floor and having a mass exceeding 40 kg are not tilted.
This probe is intended to verify the basic protection against access to hazardous parts.
Feature of Electrical Appliances Testing Equipment:
The handle and guard of the test probe B are made by insulating material nylon. And the finger made by stainless steels.
The test probe B can be used with a push-pull force gauge.
Parameter of Test Probe B:
| Model | HT-I02 |
| Name | IEC 61032 test probe B |
| Joint 1 | 30±0.2 |
| Joint 2 | 60±0.2 |
| Finger length | 80±0.2 |
| Fingertip to guard | 180±0.2 |
| Cylindrical | R2±0.05 |
| Spherical | R4±0.05 |
| Fingertip cutting bevel angle | 37o 0 -10′ |
| Fingertip taper | 14 o 0 -10′ |
| Test finger diameter | Ф12 0 -0.05 |
| A-A Section diameter | Ф50 |
| A-A Section width | 20±0.2 |
| Guard diameter | Ф75±0.2 |
| Guard thickness | 5±0.5 |
| Applied standard | IEC 61032-1 |
