Guangzhou HongCe Equipment Co., Ltd.
We provide you with industry leading test equipment, advanced online system and solutions–anywhere in the world.
Add to Cart
Length 100mm Diameter 1mm - Test Probe D With 1 N Force Scale Display IEC60529
This wire is a test device used to prevent the human body from touching dangerous parts. This tester is also used to check the protection against touch of hand-held wire.
1, according to GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL and other relevant provisions made.
2. Class D test probe (Class D test needle) is an essential instrument for anti-shock protection test of household and similar electrical appliances.
Product information:
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D and IEC 62368-1 Figure V.5, IEC 60065:2014 clause 9.1.4, and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with force.
Main specification and corresponding technical parameters:
| Model | HT-I04T |
| Name | Test rod probe with force |
| Diameter of the metal wire | Ф1+0.05 0 |
| Sphere diameter | SФ35±0.2 |
| Handle diameter | Ф10 |
| Probe length | 100±0.2 |
| Handle length | ---- |
| Force | With force of 1N |
| Applied standard | IEC60529 |
