Guangzhou HongCe Equipment Co., Ltd.
We provide you with industry leading test equipment, advanced online system and solutions–anywhere in the world.
Add to Cart
IEC 60227-1 Cable Testing Equipment Bending Test Apparatus With 60 Per Minute Flexing Rate
IEC60227-1 clause 5.6.3.2 Bending test for tinsel cord:
See 3.2 of IEC 60227-2.
During the test with 60 000 bending cycles, i.e. 120 000 single strokes, interruption of the current shall not occur. Cable Testing Equipment
After the test, the sample shall withstand the voltage test carried out in accordance with 2.2 of IEC 60227-2, the voltage, however, being 1 500 V and applied only between the conductors connected together and the water.
Introduction:
The cord bending tester is designed and manufactured according to IEC 60227-1 clause 5.6.3.2, IEC 60227-2 clause 3.2. It is used to checking the power cord flexing(bending) resistance performance. Test object of rated voltages up to and including 450/750V polyvinyl chloride insulated cables. Cable Testing Equipment
The test device is easy to operate, can preset the number of test times (up to 999999 times), the test speed and test angle can be adjusted, load current 0-1A stepless adjustable, and with the current conduction detection function. Tester will stop automatically when preset test times completed or detected conduction interrupt, record the tested times and alarm with sound. The equipment is manufactured according to the standard and the sample fixture matches the multiple samples. The utility model has the advantages of beautiful appearance, strong function and high reliability, and is an indispensable equipment for cable manufacturers and laboratory testing. Cable Testing Equipment
Technical Parameters:
| Item Name | Parameters |
| Input Power | 230V, 50Hz |
| Work station | 1 station |
| Flexing angle | Each side 45°, 60°, 90°, has a dial for corresponding reference. Default 90°. |
| Flexing speed rate | 10~60times per min, manual adjust |
| Test times | 0~999999 times, can be preset and displayed |
| Load weights | 5N*1 |
| Output voltage | 12V Cable Testing Equipment |
| Output current | 0-1A |
| Specimen fixture | Specific fixtures |
| Conduction detection | The test device is equipped with power supply terminals for the test samples, and it has a conduction detection function, if there is no current go through the test sample, the indicator light turns on, alarm occurs and the test stops, records the real-time test times |
Picture for reference:
