Guangzhou HongCe Equipment Co., Ltd.
We provide you with industry leading test equipment, advanced online system and solutions–anywhere in the world.
Add to Cart
IEC60335 Testing Equipment Of Plc Control System 1000mm Adjustable Automatic Cord Reels Endurance Tester
Standard: Clause 22.16 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements.
Application: It is used to check the automatic cord reels shall be constructed so that they do not cause
– undue abrasion or damage to the sheath of the flexible cord;
– breakage of conductor strands;
– undue wear of contacts.
Test sample: Automatic cord reels of household appliances and similar electrical appliances.
Feature: The device adopts a multi-functional fixture, large work surface, can test cord reels up to 300cm, test speed (5-30 times / min) is adjustable, and it is suitable for most test electrical products.
Parameters:
| Input Power | 220V/50HZ |
| Gas Source | Compressed air 5 ~ 7kg / cm² |
| Test Speed | 30 cycles / min (or at the maximum rate allowed by the construction of the cord reel if this is less) |
| Test Cycles | 0~9999 times, the test device will stop working automatically when the preset test cycles are finished |
| Drive Mode | Pneumatic |
| Withdrawable Angle | 30~70°, can be preset |
| Fixture | Quick clamping fixtures, easy for clamping the test sample |
| Withdrawable Stroke | Maximum 1000mm, can be adjusted |
Installation And Commissioning:
1. Turn on the power, preset test times and the interval time, the backward time is default (no need to preset). Regarding the setting method, please refer to the instrument parameter setting method.
2. Access to the gas source, open the intake switch, required pressure: > 0.6mpa.
Note: The reel speed will be reduced at a low pressure.
1. Adjust the position of the upper limit switch according to the required pull-out length of the cord. Start the device, and determine the pull-out length of the cord.
4. Shake the adjustment hand wheel to adjust the angle of the pull-out cord.
5. Start the device, and adjust the test speed to the desired test speed.
Adjust the test speed Adjust the air pressure Adjust the interval time
6. Install the test sample on the proper position:
Fix the plug of the cord, then adjust the hand wheel to make the axis of the reel in the vertical position on the lift rod .
If the sample reel has the control switch , should make the control switch in the open state.
Figure: vacuum cleaner installation schematic
About Us:
Guangzhou Hongce Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.